Flexheat System
- Products
- Flexheat System
FLEXHEAT SYSTEM
LOW VOLTAGE FLOOR HEATING SYSTEM
TruHeat’s FlexHEAT system is a unique low voltage in-floor heating system designed to offer exceptional energy savings featuring our patented aluminum alloy heating tape. The tape is a miniscule 0.5 mm in thickness and comes in a variety of widths ranging from 5-12 cm (depending on the kit) size. Low voltage current is passed through the heating tape allowing it to gently warms the floor, resulting in the perfect spread of heat, creating a comfortable environment for all.
The FlexHEAT system covers 50-70% of the floor surface and therefore can operate at lower temperatures to provide the same heat output as other electric floor heating systems. This results in an efficient uniform heat output but with minimal energy consumption. FlexHEAT system is ideal for any irregular shaped rooms because the heat tape is flexible enough to be installed in any direction and is perfect for heating various areas with a single kit. There are 7 different kit sizes to choose from with each kit covering various square footages.
![](https://truheatsystems.com/wp-content/uploads/2023/04/even-heat-distribution.webp)
EVEN HEAT DISTRIBUTION
![](https://truheatsystems.com/wp-content/uploads/2023/04/minimal-energy-consumption.webp)
LOW ENERGY CONSUMPTION
![](https://truheatsystems.com/wp-content/uploads/2023/04/installs-in-any-direction.webp)
INSTALLS IN ANY DIRECTION
![](https://truheatsystems.com/wp-content/uploads/2023/04/covers-multiple-areas.webp)
HEATS MULTIPLE ZONES WITH SINGLE UNIT
LEARN WHY OUR TECHNOLOGY CAN SAVE YOU ON ENERGY CONSUMPTION
REQUEST A QUOTE
KEY BENEFITS
- COVERS MULTIPLE AREAS WITH JUST ONE UNIT
- SAFETY OF LOW VOLTAGE
- EVEN HEAT DISTRIBUTION
- SUITABLE AS PRIMARY HEAT SOURCE
- LOW 0.5 MM PROFILE
- FLEXIBLE DESIGN
EASY INSTALLATION
The FlexHEAT system is a great way to heat multiple areas using one unit and all with the safety of low voltage. Installation is super easy as well due the flexible nature of our aluminum alloy heat tape which can be taken in any direction. Due to the ultra slim nature of the heat tape, minimal layer of concrete is required to be placed on top saving you on installation costs compared to conventional heating cables which need a far thicker concrete layer and don’t offer the same great surface coverage as the FlexHeat system does.
Simply plan out your desired area of heating, choose the appropriate kit size, layout the heat tape, make the electrical connections and cover it all up with a thin layer of self-levelling cement or tile direction on top.
STEP 1
PLAN YOUR LAYOUT
STEP 2
LAY HEAT TAPE
STEP 3
MAKE ELECTRICAL CONNECTIONS
STEP 4
SEAL WITH CEMENT LAYER
![](https://truheatsystems.com/wp-content/uploads/2023/04/wood-and-floating-floors.png)
UNDER FLOATING FLOORS (INSTALLATION)
- 1. SUBFLOOR
- 2. CEMENT BOARD (OPTIONAL)
- 3. HEAT TAPE
- 4. FIBERGLASS MESH
- 5. SELF LEVELLING CEMENT
- 6. WOOD/FLOATING FLOORS
* Thermal insulation is recommended and is not a must. This prevents heat loss and maximises system efficiency.
![](https://truheatsystems.com/wp-content/uploads/2023/04/tile-installation.png)
UNDER CERAMIC/STONE TILES
- 1. SUBFLOOR
- 2. CEMENT BOARD (OPTIONAL)
- 3.HEAT TAPE
- 4. FIBERGLASS MESH
- 5. POLYMER MODIFIED THINSET
- 6. CERAMIC/STONE TILES
* Thermal insulation is recommended and is not a must. This prevents heat loss and maximises system efficiency.
TECHNICAL SPECIFICATIONS
FLEXHEAT SYSTEM
Insulated aluminum alloy heating tape powered via low voltage current.
TAPE THICKNESS
0.5 MM, (1/32 IN.)
HEATING OUTPUT
Available in 6-7W/Sqft (Low Voltage Heating)
HEAT TAPE WIDTHS
5-12 CM (2-4.5 IN.)
VOLTAGE
Available in 120v, 240v
WARRANTY
15 Years
OPERATING TEMPERATURE
25-28°C (77-82°F)